Automatic Model Loading on Server Startup: Difference between revisions

From QPR ProcessAnalyzer Wiki
Jump to navigation Jump to search
No edit summary
m (Ollvihe moved page Automatic Loading on Server Startup to Automatic Model Loading on Server Startup without leaving a redirect)
(No difference)

Revision as of 14:59, 25 October 2020

QPR ProcessAnalyzer models can be loaded automatically beforehand into the server memory, when the server starts. When models are large and loading takes a long time, it's useful to preload the models. The automatic loading can be switched on in the Model properties in the Details tab by changing the Load on Startup setting.

For models that are set to load automatically on server startup, you also need to set the 'Drop Unused Model After setting to a large value (as shown by the previous example), to make sure that it remains in the memory even if it's not used (e.g. 100.00:00:00).

It's possible to control how many models are loaded simultaneously at maximum, to limit how much server capacity the model loading can use. The default value is two models at the same time. To change this setting, see the PA_Configuration table. This setting only affects the model loading on startup (not model loading initiated by users). If loading of a model fails, the loading just continues to the next model.

For the LoadOnStartup setting to work, IIS configuration for the QPR ProcessAnalyzer Server need to be in place.