CallWebService Script Examples: Difference between revisions

From QPR ProcessAnalyzer Wiki
Jump to navigation Jump to search
No edit summary
Line 30: Line 30:
</pre>
</pre>


== Reload model ==
The following script triggers a reload for a model. The script does not wait for the model to be loaded, so the result of the reloading is not available.
<pre>
DECLARE @paWSUrl NVARCHAR(MAX);
DECLARE @modelId NVARCHAR(MAX);
DECLARE @username NVARCHAR(MAX);
DECLARE @password NVARCHAR(MAX);
SET @paWSUrl = 'http://localhost/QPRPA/';
SET @modelId = '12345';
SET @username = 'qpr';
SET @password = 'demo';
SELECT @paWSUrl AS paWSUrl, @modelId AS modelId, @username AS username, @password AS password INTO #loginData;
-- Authenticate
(SELECT 'Method', 'POST') UNION ALL
(SELECT 'Address', @paWSUrl + '/MainService.svc/webHttp/Authenticate') UNION ALL
(SELECT 'Body', '{"logOnName":"' + @username + '","password":"' + @password + '","parameters":[]}') UNION ALL
(SELECT 'ContentType', 'application/json') UNION ALL
(SELECT 'Accept', 'application/json')
--#CallWebService
PRINT 'Authentication result: ' + COALESCE(@_ResponseText, '<none>') + ' StatusCode: ' + CAST(@_ResponseStatusCode AS NVARCHAR(MAX)) + ' Success: ' + CAST(@_ResponseSuccess AS NVARCHAR(MAX));
DECLARE @sessionId NVARCHAR(MAX);
DECLARE @pos INT;
-- Extract session id
SET @pos = PATINDEX('%"SessionId","Value":"%', @_ResponseText);
PRINT @pos;
IF @pos > 0
BEGIN
  SET @sessionId = SUBSTRING(@_ResponseText, @pos + 21, LEN(@_ResponseText))
  SET @pos = PATINDEX('%"%',@sessionId);
  IF @pos > 0
  BEGIN
    SET @sessionId = SUBSTRING(@sessionId, 0, @pos);
    PRINT 'Session id: ' + @sessionId;
  END;
END;
SELECT @sessionId AS sessionId INTO #SessionData;
DECLARE @paWSUrl NVARCHAR(MAX);
DECLARE @modelId NVARCHAR(MAX);
SELECT @paWSUrl = paWSUrl FROM #loginData;
SELECT @modelId = modelId FROM #loginData;
(SELECT 'Method', 'POST') UNION ALL
(SELECT 'Address', @paWSUrl + '/MainService.svc/webHttp/ResetModelCache') UNION ALL
(SELECT 'Body', '{"sessionId": "' + @sessionId + '","modelId":"' + @modelId + '","parameters": [{"Key":"ReloadModel","Value":"1"}]}') UNION ALL
(SELECT 'ContentType', 'application/json') UNION ALL
(SELECT 'Accept', 'application/json')
--#CallWebService
PRINT 'QueryObjectProperties result: ' + COALESCE(@_ResponseText, '<none>') + ' StatusCode: ' + CAST(@_ResponseStatusCode AS NVARCHAR(MAX)) + ' Success: ' + CAST(@_ResponseSuccess AS NVARCHAR(MAX));
DECLARE @sessionId NVARCHAR(MAX);
DECLARE @paWSUrl NVARCHAR(MAX);
SELECT @sessionId = sessionId FROM #SessionData;
SELECT @paWSUrl = paWSUrl FROM #loginData;
-- LogOff
(SELECT 'Method', 'POST') UNION ALL
(SELECT 'Address', @paWSUrl + '/MainService.svc/webHttp/LogOff') UNION ALL
(SELECT 'Body', '{"sessionId": "' + @sessionId + '"}') UNION ALL
(SELECT 'ContentType', 'application/json') UNION ALL
(SELECT 'ExecuteInClientSide', '1') UNION ALL
(SELECT 'Accept', 'application/json')
--#CallWebService
PRINT 'LogOff result: ' + COALESCE(@_ResponseText, '<none>') + ' StatusCode: ' + CAST(@_ResponseStatusCode AS NVARCHAR(MAX)) + ' Success: ' + CAST(@_ResponseSuccess AS NVARCHAR(MAX));
</pre>


== A ProcessAnalyzer script example to authenticate user, make a simple query into the server and logoff ==
== A ProcessAnalyzer script example to authenticate user, make a simple query into the server and logoff ==

Revision as of 10:51, 6 September 2019

This page contains script examples for the CallWebService script command. 

(SELECT 'Method', 'GET') UNION ALL
(SELECT 'Address', 'http://google.com') UNION ALL
(SELECT 'ContentType', 'application/json') UNION ALL
(SELECT 'Accept', '*/*')
--#CallWebService
PRINT SUBSTRING(@_ResponseText, 1, 50);

When the script is run, entries similar to the following will be shown in the script log: 

Execution duration: 0,753 seconds
Execution Log:
2015-09-14T13:59:49.2838661+03:00 	Notification 	85 	Script operation: "--#CallWebService" started
2015-09-14T13:59:49.3468813+03:00 	Notification 	85 	Address: http://google.com
Method: GET
ContentType: application/json
Encoding: Unicode (UTF-8)
Body content length: 0
Timeout: 60000
ExecuteInClientSide: 0
Additional headers: Accept(3)
2015-09-14T13:59:49.6579900+03:00 	Notification 	85 	Script operation: "--#CallWebService" completed: Result: OK, text length: 53019, status code: 200

2015-09-14T13:59:49.7230130+03:00 	Notification 	85 	<!doctype html><html itemscope="" itemtype="http:/


Reload model

The following script triggers a reload for a model. The script does not wait for the model to be loaded, so the result of the reloading is not available. 

DECLARE @paWSUrl NVARCHAR(MAX);
DECLARE @modelId NVARCHAR(MAX);
DECLARE @username NVARCHAR(MAX);
DECLARE @password NVARCHAR(MAX);
SET @paWSUrl = 'http://localhost/QPRPA/';
SET @modelId = '12345';
SET @username = 'qpr';
SET @password = 'demo';

SELECT @paWSUrl AS paWSUrl, @modelId AS modelId, @username AS username, @password AS password INTO #loginData;

-- Authenticate
(SELECT 'Method', 'POST') UNION ALL
(SELECT 'Address', @paWSUrl + '/MainService.svc/webHttp/Authenticate') UNION ALL
(SELECT 'Body', '{"logOnName":"' + @username + '","password":"' + @password + '","parameters":[]}') UNION ALL
(SELECT 'ContentType', 'application/json') UNION ALL
(SELECT 'Accept', 'application/json')
--#CallWebService
PRINT 'Authentication result: ' + COALESCE(@_ResponseText, '<none>') + ' StatusCode: ' + CAST(@_ResponseStatusCode AS NVARCHAR(MAX)) + ' Success: ' + CAST(@_ResponseSuccess AS NVARCHAR(MAX));

DECLARE @sessionId NVARCHAR(MAX);
DECLARE @pos INT;

-- Extract session id
SET @pos = PATINDEX('%"SessionId","Value":"%', @_ResponseText);
PRINT @pos;
IF @pos > 0
BEGIN
  SET @sessionId = SUBSTRING(@_ResponseText, @pos + 21, LEN(@_ResponseText))
  SET @pos = PATINDEX('%"%',@sessionId);
  IF @pos > 0
  BEGIN
    SET @sessionId = SUBSTRING(@sessionId, 0, @pos);
    PRINT 'Session id: ' + @sessionId;
  END;
END;

SELECT @sessionId AS sessionId INTO #SessionData;

DECLARE @paWSUrl NVARCHAR(MAX);
DECLARE @modelId NVARCHAR(MAX);
SELECT @paWSUrl = paWSUrl FROM #loginData;
SELECT @modelId = modelId FROM #loginData;

(SELECT 'Method', 'POST') UNION ALL
(SELECT 'Address', @paWSUrl + '/MainService.svc/webHttp/ResetModelCache') UNION ALL
(SELECT 'Body', '{"sessionId": "' + @sessionId + '","modelId":"' + @modelId + '","parameters": [{"Key":"ReloadModel","Value":"1"}]}') UNION ALL
(SELECT 'ContentType', 'application/json') UNION ALL
(SELECT 'Accept', 'application/json')
--#CallWebService
PRINT 'QueryObjectProperties result: ' + COALESCE(@_ResponseText, '<none>') + ' StatusCode: ' + CAST(@_ResponseStatusCode AS NVARCHAR(MAX)) + ' Success: ' + CAST(@_ResponseSuccess AS NVARCHAR(MAX));

DECLARE @sessionId NVARCHAR(MAX);
DECLARE @paWSUrl NVARCHAR(MAX);
SELECT @sessionId = sessionId FROM #SessionData;
SELECT @paWSUrl = paWSUrl FROM #loginData;

-- LogOff
(SELECT 'Method', 'POST') UNION ALL
(SELECT 'Address', @paWSUrl + '/MainService.svc/webHttp/LogOff') UNION ALL
(SELECT 'Body', '{"sessionId": "' + @sessionId + '"}') UNION ALL
(SELECT 'ContentType', 'application/json') UNION ALL
(SELECT 'ExecuteInClientSide', '1') UNION ALL
(SELECT 'Accept', 'application/json')
--#CallWebService
PRINT 'LogOff result: ' + COALESCE(@_ResponseText, '<none>') + ' StatusCode: ' + CAST(@_ResponseStatusCode AS NVARCHAR(MAX)) + ' Success: ' + CAST(@_ResponseSuccess AS NVARCHAR(MAX));

A ProcessAnalyzer script example to authenticate user, make a simple query into the server and logoff

------------------------------
--Example (Authenticate + QueryObjectProperties + LogOff):
------------------------------
-- Authenticate
(SELECT 'Method', 'POST') UNION ALL
(SELECT 'Address', 'http://<server IP address>/qprpa/MainService.svc/webHttp/Authenticate') UNION ALL
(SELECT 'Body', '{"logOnName":"GlobalAdmin","password":"demo", "parameters":{}}') UNION ALL
(SELECT 'ContentType', 'application/json') UNION ALL
(SELECT 'ExecuteInClientSide', '1') UNION ALL
(SELECT 'Accept', '*/*')
--#CallWebService
PRINT 'Authentication result: ' + COALESCE(@_ResponseText, '<none>') + ' StatusCode: ' + CAST(@_ResponseStatusCode AS NVARCHAR(MAX)) + ' Success: ' + CAST(@_ResponseSuccess AS NVARCHAR(MAX));

DECLARE @sessionId NVARCHAR(MAX);
DECLARE @pos INT;

-- Extract session id
SET @pos = PATINDEX('%""SessionId"",""Value"":""%',@_ResponseText);
IF @pos > 0
BEGIN
  SET @sessionId = SUBSTRING(@_ResponseText, @pos + 21, LEN(@_ResponseText))
  SET @pos = PATINDEX('%""%',@sessionId);
  IF @pos > 0
  BEGIN
    SET @sessionId = SUBSTRING(@sessionId, 0, @pos)
    PRINT 'Session id: ' + @sessionId;
  END;
END;

SELECT @sessionId AS SES_ID INTO #SessionData;

-- QueryObjectProperties
(SELECT 'Method', 'POST') UNION ALL
(SELECT 'Address', 'http://<server IP address>/qprpa/QueryObjectProperties') UNION ALL
(SELECT 'Body', '{"sessionId": "' + @sessionId + '","uniqueObjectIds": ["PA.1.1"],"properties": [{ "Name": "name" }, { "Name": "typename" }],"parameters": []}') UNION ALL
(SELECT 'ContentType', 'application/json') UNION ALL
(SELECT 'ExecuteInClientSide', '1') UNION ALL
(SELECT 'Accept', '*/*')
--#CallWebService
PRINT 'QueryObjectProperties result: ' + COALESCE(@_ResponseText, '<none>') + ' StatusCode: ' + CAST(@_ResponseStatusCode AS NVARCHAR(MAX)) + ' Success: ' + CAST(@_ResponseSuccess AS NVARCHAR(MAX));

DECLARE @sessionId NVARCHAR(MAX);
SELECT @sessionId = SES_ID FROM #SessionData;

-- LogOff
(SELECT 'Method', 'POST') UNION ALL
(SELECT 'Address', 'http://<server IP address>/qprpa/LogOff') UNION ALL
(SELECT 'Body', '{"sessionId": "' + @sessionId + '"}') UNION ALL
(SELECT 'ContentType', 'application/json') UNION ALL
(SELECT 'ExecuteInClientSide', '1') UNION ALL
(SELECT 'Accept', '*/*')
--#CallWebService
PRINT 'LogOff result: ' + COALESCE(@_ResponseText, '<none>') + ' StatusCode: ' + CAST(@_ResponseStatusCode AS NVARCHAR(MAX)) + ' Success: ' + CAST(@_ResponseSuccess AS NVARCHAR(MAX));
Retrieved from "https://wiki.onqpr.com/pa/index.php?title=CallWebService_Script_Examples&oldid=13896"